Saltar al contenido principal

Samsung HMX-W300 USB Port Replacement

Qué necesitas

  1. Samsung HMX-W300 USB Port Replacement, Disassembling Samsung HMX-W300: paso 1, imagen 1 de 3 Samsung HMX-W300 USB Port Replacement, Disassembling Samsung HMX-W300: paso 1, imagen 2 de 3 Samsung HMX-W300 USB Port Replacement, Disassembling Samsung HMX-W300: paso 1, imagen 3 de 3
    • To remove the wristband of the device, grab the middle loop and pull the band through.

  2. Samsung HMX-W300 USB Port Replacement: paso 2, imagen 1 de 2 Samsung HMX-W300 USB Port Replacement: paso 2, imagen 2 de 2
    • Remove four screws with a Hex 1.5 mm screwdriver.

  3. Samsung HMX-W300 USB Port Replacement: paso 3, imagen 1 de 3 Samsung HMX-W300 USB Port Replacement: paso 3, imagen 2 de 3 Samsung HMX-W300 USB Port Replacement: paso 3, imagen 3 de 3
    • Open the HDMI door on the side of the camera.

    • Remove the single screw using a Phillips #00 screwdriver.

  4. Samsung HMX-W300 USB Port Replacement: paso 4, imagen 1 de 3 Samsung HMX-W300 USB Port Replacement: paso 4, imagen 2 de 3 Samsung HMX-W300 USB Port Replacement: paso 4, imagen 3 de 3
    • Use the iFixit opening tool on both sides on the device. Pry apart both sections with light force.

    • Do not apply too much force. There is a wire that attaches the front case with the rear case that can be damaged.

  5. Samsung HMX-W300 USB Port Replacement: paso 5, imagen 1 de 3 Samsung HMX-W300 USB Port Replacement: paso 5, imagen 2 de 3 Samsung HMX-W300 USB Port Replacement: paso 5, imagen 3 de 3
    • Pull the wire ribbon out with a pair of tweezers.

  6. Samsung HMX-W300 USB Port Replacement, Battery: paso 6, imagen 1 de 2 Samsung HMX-W300 USB Port Replacement, Battery: paso 6, imagen 2 de 2
    • Remove the four screws from the battery housing using a Phillips #00 screwdriver.

  7. Samsung HMX-W300 USB Port Replacement: paso 7, imagen 1 de 1
    • Use the iFixit opening tool to pry the battery housing open.

  8. Samsung HMX-W300 USB Port Replacement: paso 8, imagen 1 de 3 Samsung HMX-W300 USB Port Replacement: paso 8, imagen 2 de 3 Samsung HMX-W300 USB Port Replacement: paso 8, imagen 3 de 3
    • After removing the battery housing, take the battery out.

  9. Samsung HMX-W300 USB Port Replacement, USB Port: paso 9, imagen 1 de 3 Samsung HMX-W300 USB Port Replacement, USB Port: paso 9, imagen 2 de 3 Samsung HMX-W300 USB Port Replacement, USB Port: paso 9, imagen 3 de 3
    • Use an iFixit opening tool to pry up the plastic cover.

    • Use tweezers to remove the wire from the slots.

  10. Samsung HMX-W300 USB Port Replacement: paso 10, imagen 1 de 2 Samsung HMX-W300 USB Port Replacement: paso 10, imagen 2 de 2
    • Remove both screws from the USB port using a Phillips #00 screwdriver.

  11. Samsung HMX-W300 USB Port Replacement: paso 11, imagen 1 de 2 Samsung HMX-W300 USB Port Replacement: paso 11, imagen 2 de 2
    • Push the USB port inside the case to remove it from the device.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Robert

Miembro Desde 01/21/15

966 Reputación

8 Guías creadas

Equipo

USF Tampa, Team 9-2, Blackwell Winter 2015 Miembro de USF Tampa, Team 9-2, Blackwell Winter 2015

USFT-BLACKWELL-W15S9G2

4 Miembros

16 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 2

Todo El Tiempo: 416