Saltar al contenido principal

Introducción

Demonstrates how to replace the front case of the camera through pictures and words. Replacement of the rear case requires disassembling battery housing and battery from front case.

  1. Samsung HMX-W300 Front Case Replacement, Remove wristband: paso 1, imagen 1 de 3 Samsung HMX-W300 Front Case Replacement, Remove wristband: paso 1, imagen 2 de 3 Samsung HMX-W300 Front Case Replacement, Remove wristband: paso 1, imagen 3 de 3
    • To remove the wristband of the device, grab the middle loop and pull the band through (as shown in the picture).

  2. Samsung HMX-W300 Front Case Replacement, Front case screw removal: paso 2, imagen 1 de 2 Samsung HMX-W300 Front Case Replacement, Front case screw removal: paso 2, imagen 2 de 2
    • Remove all four Hex screws with a Hex 1.5 mm screwdriver.

  3. Samsung HMX-W300 Front Case Replacement, Remove HDMI screw: paso 3, imagen 1 de 3 Samsung HMX-W300 Front Case Replacement, Remove HDMI screw: paso 3, imagen 2 de 3 Samsung HMX-W300 Front Case Replacement, Remove HDMI screw: paso 3, imagen 3 de 3
    • To remove the HDMI screw, open the HDMI door on the side. Remove the screw using a size #00 Phillips screwdriver.

  4. Samsung HMX-W300 Front Case Replacement, Open front case.: paso 4, imagen 1 de 3 Samsung HMX-W300 Front Case Replacement, Open front case.: paso 4, imagen 2 de 3 Samsung HMX-W300 Front Case Replacement, Open front case.: paso 4, imagen 3 de 3
    • As shown in the picture, use the iFixit Opening Tool on both sides on the device. Pry apart both sections with light force.

    • Do not apply too much force. There is a wire that attaches the front case with the rear case that can be damaged.

  5. Samsung HMX-W300 Front Case Replacement, Unplug wire.: paso 5, imagen 1 de 3 Samsung HMX-W300 Front Case Replacement, Unplug wire.: paso 5, imagen 2 de 3 Samsung HMX-W300 Front Case Replacement, Unplug wire.: paso 5, imagen 3 de 3
    • Pull the wire ribbon out with a pair of tweezers.

  6. Samsung HMX-W300 Front Case Replacement, Battery screw removal: paso 6, imagen 1 de 2 Samsung HMX-W300 Front Case Replacement, Battery screw removal: paso 6, imagen 2 de 2
    • To remove the battery housing, you must first use a size 00 Phillips screwdriver to remove the four screws.

  7. Samsung HMX-W300 Front Case Replacement, Battery housing removal: paso 7, imagen 1 de 1
    • Use the iFixit Opening Tool to pry the battery housing open.

  8. Samsung HMX-W300 Front Case Replacement, Remove battery: paso 8, imagen 1 de 3 Samsung HMX-W300 Front Case Replacement, Remove battery: paso 8, imagen 2 de 3 Samsung HMX-W300 Front Case Replacement, Remove battery: paso 8, imagen 3 de 3
    • After removing the battery housing, take the battery out.

  9. Samsung HMX-W300 Front Case Replacement, Location of USB screws and wire slots.: paso 9, imagen 1 de 3 Samsung HMX-W300 Front Case Replacement, Location of USB screws and wire slots.: paso 9, imagen 2 de 3 Samsung HMX-W300 Front Case Replacement, Location of USB screws and wire slots.: paso 9, imagen 3 de 3
    • Here highlighted are the two size 00 Phillips screwdriver and the slots where the wire is held.

  10. Samsung HMX-W300 Front Case Replacement, Remove wire.: paso 10, imagen 1 de 3 Samsung HMX-W300 Front Case Replacement, Remove wire.: paso 10, imagen 2 de 3 Samsung HMX-W300 Front Case Replacement, Remove wire.: paso 10, imagen 3 de 3
    • Use iFixit Opening Tool to pry the plastic cover as shown

    • Use tweezers to remove the wire out of slots.

  11. Samsung HMX-W300 Front Case Replacement, Remove screw: paso 11, imagen 1 de 1
    • Remove both screws on USB port using a size 00 Phillips screwdriver.

  12. Samsung HMX-W300 Front Case Replacement, Removal of USB: paso 12, imagen 1 de 2 Samsung HMX-W300 Front Case Replacement, Removal of USB: paso 12, imagen 2 de 2
    • Now push the USB port inside the case to remove it as shown.

  13. Samsung HMX-W300 Front Case Replacement, Replace front case: paso 13, imagen 1 de 1
    • Removal of the front case completed.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Robert

Miembro Desde 21/01/15

966 Reputación

8 Guías creadas

Equipo

USF Tampa, Team 9-2, Blackwell Winter 2015 Miembro de USF Tampa, Team 9-2, Blackwell Winter 2015

USFT-BLACKWELL-W15S9G2

4 Miembros

16 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 4

Ultimos 30 días: 19

Todo El Tiempo: 257