Saltar al contenido principal

Partes

No se especificaron partes.

  1. Place the phone screen down like this.
    • Place the phone screen down like this.

  2. Find the little slit on the side of the phone and stick your fingernail in between the slit and push your thumb upwards towards your hand. Look at the next picture for the slit.
    • Find the little slit on the side of the phone and stick your fingernail in between the slit and push your thumb upwards towards your hand.

    • Look at the next picture for the slit.

  3. Kits de Reparación de Android

    Estás a un kit de tu nueva pantalla o batería.

    Comprar Ahora

    Kits de Reparación de Android

    Estás a un kit de tu nueva pantalla o batería.

    Comprar Ahora
  4. Pop out the battery by placing your finger in between the open slit. Pop out the battery by placing your finger in between the open slit. Pop out the battery by placing your finger in between the open slit.
    • Pop out the battery by placing your finger in between the open slit.

  5. Identify the screws as follows and take your screwdriver and unscrew these screws. The screws highlighted in the picture do not need to come out, in fact it is really hard to remove them. Simply unscrewing them will loosen the back of the phone.
    • Identify the screws as follows and take your screwdriver and unscrew these screws.

    • The screws highlighted in the picture do not need to come out, in fact it is really hard to remove them. Simply unscrewing them will loosen the back of the phone.

  6. Once you have unscrewed the four screws, take your spudger/plastic opening tool and wedge it in the back of the phone as shown in the picture.
    • Once you have unscrewed the four screws, take your spudger/plastic opening tool and wedge it in the back of the phone as shown in the picture.

    • Find a very thin crevice which seems to run around the phone itself and assertively wedge the spudger into the crevice.

    • Once you have successfully inserted the spudger follow through by sliding the spudger assertively around the phone frame.

    • Apply moderate force while trying to wedge the tool in.

  7. The back should now be exposed like the first picture after the case was removed. Flip open the phone, main screen facing up. Push the keypad and slide it out.
    • The back should now be exposed like the first picture after the case was removed.

    • Flip open the phone, main screen facing up.

    • Push the keypad and slide it out.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Michael Huang

Miembro Desde 30/03/15

379 Reputación

3 Guías creadas

Equipo

Añadir comentario

Ver Estadísticas:

Past 24 Hours: 1

Past 7 Days: 1

Past 30 Days: 6

Global: 266