Repara tus cosas Comunidad Tienda

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Samsung Glyde Camera Replacement

Introducción

This guide will provide a step by step procedure for installing the camera.

Qué necesitas

  1. Samsung Glyde Camera Replacement, Battery: paso 1, imagen 1 de 1

    • Using your thumb, press down and slide the back cover away from the camera.

    Traducir

  2. Samsung Glyde Camera Replacement: paso 2, imagen 1 de 1

    • Remove the battery from the phone by using your plastic opening tool to find a gap at any edge of the battery and lifting the battery up.

    Traducir

  3. Samsung Glyde Camera Replacement, Motherboard: paso 3, imagen 1 de 2 Samsung Glyde Camera Replacement, Motherboard: paso 3, imagen 2 de 2

    • Using a Phillips#00 screw driver, remove the six 4mm screws holding the back case together.

    Traducir

  4. Samsung Glyde Camera Replacement: paso 4, imagen 1 de 2 Samsung Glyde Camera Replacement: paso 4, imagen 2 de 2

    • Use a plastic opening tool to pry the case off. To do this, find a gap on any side of the phone, top preferably, and slip the tip of the tool in the gap

    • Now use moderate strength and slowly maneuver the tool around the outside until the case becomes loose.

    • Using your fingers, take the case off.

    Traducir

  6. Samsung Glyde Camera Replacement: paso 5, imagen 1 de 2 Samsung Glyde Camera Replacement: paso 5, imagen 2 de 2

    • The green film above the camera is the camera connector to the motherboard.

    • Use a plastic opening tool to disconnect the camera connector.

    Traducir

  7. Samsung Glyde Camera Replacement: paso 6, imagen 1 de 2 Samsung Glyde Camera Replacement: paso 6, imagen 2 de 2

    • The golden film connector connects the keyboard to the motherboard.

    • Use a plastic opening tool to disconnect the keyboard connector.

    Traducir

  8. Samsung Glyde Camera Replacement: paso 7, imagen 1 de 2 Samsung Glyde Camera Replacement: paso 7, imagen 2 de 2

    • The circular connector holds the motherboard in place.

    • Using a plastic opening tool, disconnect the circular connector.

    Traducir

  9. Samsung Glyde Camera Replacement: paso 8, imagen 1 de 3 Samsung Glyde Camera Replacement: paso 8, imagen 2 de 3 Samsung Glyde Camera Replacement: paso 8, imagen 3 de 3

    • There is a LCD connector underneath the motherboard.

    • Gently lift the far edge of the motherboard upwards toward the center of the phone.

    • Using a plastic opening tool, disconnect the LCD connector.

    Traducir

  10. Samsung Glyde Camera Replacement: paso 9, imagen 1 de 2 Samsung Glyde Camera Replacement: paso 9, imagen 2 de 2

    • After disconnecting the four connectors, gently lift the motherboard up with your fingers.

    • Place the motherboard in a secure area.

    Traducir

  11. Samsung Glyde Camera Replacement, Camera: paso 10, imagen 1 de 2 Samsung Glyde Camera Replacement, Camera: paso 10, imagen 2 de 2

    • Use your thumb and index finger to grip the camera connector.

    • Pull the camera connector upwards to detach the camera.

    • The camera was glued on, so this may require moderate strength.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 6 otros colaboradores

Cameron Law

Miembro Desde 10/12/11

142 Reputación

5 Guías creadas

Insignias: 6

+ 3 más insignias

Equipo

Cal Poly, Team 3-12, Regan Fall 2011 Miembro de Cal Poly, Team 3-12, Regan Fall 2011

CPSU-REGAN-F11S3G12

4 Miembros

14 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 1

Todo El Tiempo: 878