Saltar al contenido principal

Samsung Gear Fit Screen Replacement

Qué necesitas

  1. Samsung Gear Fit Screen Replacement, Watch Band: paso 1, imagen 1 de 2 Samsung Gear Fit Screen Replacement, Watch Band: paso 1, imagen 2 de 2
    • Place your thumbs on the ends of the screen.

    • Push the watch outward while pulling the band away from the watch.

  2. Samsung Gear Fit Screen Replacement, Screen: paso 2, imagen 1 de 1
    • Heating the device with a hair dryer may warp the screen or damage the device. It it preferable to use an iOpener for this step.

    • For step-by-step instructions on using an iOpener, see the Instrucciones de iOpener.

    • Use a hair dryer, heat gun, or an iOpener to heat the Gear Fit for 1-2 minutes until it is hot to the touch.

  3. Samsung Gear Fit Screen Replacement: paso 3, imagen 1 de 3 Samsung Gear Fit Screen Replacement: paso 3, imagen 2 de 3 Samsung Gear Fit Screen Replacement: paso 3, imagen 3 de 3
    • The screen is connected to the device by a ribbon cable on the left side with the power button facing you. Do not try to completely separate the screen from the device yet, and be careful.

    • Gently pry the screen loose using a plastic opening tool.

    • If the screen doesn't easily come loose, more heating may be required

  4. Samsung Gear Fit Screen Replacement: paso 4, imagen 1 de 3 Samsung Gear Fit Screen Replacement: paso 4, imagen 2 de 3 Samsung Gear Fit Screen Replacement: paso 4, imagen 3 de 3
    • Using tweezers as a lever, pry the inner assembly out of the external casing.

    • This will be harder than removing the screen. Moderate force may be required.

  5. Samsung Gear Fit Screen Replacement: paso 5, imagen 1 de 3 Samsung Gear Fit Screen Replacement: paso 5, imagen 2 de 3 Samsung Gear Fit Screen Replacement: paso 5, imagen 3 de 3
    • Disconnect the ribbon cables connecting the screen to the motherboard by lifting their metal connectors up off of the board with tweezers.

  6. Samsung Gear Fit Screen Replacement: paso 6, imagen 1 de 2 Samsung Gear Fit Screen Replacement: paso 6, imagen 2 de 2
    • Gently peel the screen assembly up and away from the device using tweezers.

    gear fit 2 screen assembly is very expensive at the moment at 135 USD + 10USD shipping… looks like you are buying a whole new unit, ridiculous… i am planning to buy a new GF2 and have my defective GF2 to be source of spare parts in the future ( battery, hear rate sensor, circuit board, etc..) or maybe wait some time till prices go down.

    ray floyd - Contestar

Conclusión

To reassemble your device, follow these instructions in reverse order.

17 personas más completaron esta guía.

Nathan Powell

Miembro Desde 04/24/14

1,577 Reputación

3 Guías creadas

Equipo

Cal Poly, Team 11-49, Amido Spring 2014 Miembro de Cal Poly, Team 11-49, Amido Spring 2014

CPSU-AMIDO-S14S11G49

4 Miembros

4 Guías creadas

28 comentarios

Hi!

Thank you very much for this tuto. But wher can we acquire the screen ???

Thanks a lot.

AB

aaa - Contestar

Where can you buy replacement screen?

Yele Olaniyi - Contestar

I'm also finding it difficult to buy a replacement screen too. Has anyone discovered some. I thought this website was selling some not too long ago. Any more coming in?

Rochelle - Contestar

Hi guys,

is it possible to detach the display unit from the protective plastic cover (I think it's not glass) ?

alexxtodorov - Contestar

Does anyone know where to get the replacement screen?

MrGratts - Contestar

Where to find the replacement screen?

Jaime Ramos -

Ok Kudus to the Author! I was able to purchase a screen off of ebay for 40 bucks, followed your instructions and have my watch back! Thank you

Lynn Fox - Contestar

Where did you find the screen/digitizer?

Anthony Zuniga -

Why would you get a screen for 40 Bucks?? I found a used Gear fit in better condition then mine and was 6 dollars cheaper!

victorpho.kyin -

IFIXIT is very nice, but where can I buy the spare parts?

Bernhard Schmal - Contestar

were can i buy the screen?

yenersemetoglu - Contestar

hi, where i can buy screen gear fit?

Iwish Warfly - Contestar

Where can you buy the screen/glass? No one seems to sell it.

S Ramzey - Contestar

How to reassemble? What kind of adhesive should I use?

Bernhard Schmal - Contestar

my activity screens are blank...says "unable to load data..tap to retry" nothing after I tap.

jdeiboldtsr - Contestar

need screen for samsung gear fit 2 black ..my screen crashed for some reason !!! can you let me know where i can order that ?

Shashank Dalal - Contestar

I need to buy the screen also anyone know the site to buy it on

Hale - Contestar

I need a samsung gear fit screen

Paulchambers@hpeprint - Contestar

I need a samsung gear fit screen ...how can I?

Paulchambers@hpeprint - Contestar

Do you have a contact number please?

Paulchambers@hpeprint - Contestar

would this work with gear fit 2 watch??

dontae.christianson - Contestar

No, the Gear Fit 2 is disassembled via 4 screws on the back of the device under small four rubber caps. I learned the hard way

tankerred22 -

Hello,

Your best bet is Ebay. I found one for around $35.00, but there are preowened gear fit 2 for cheaper than that. I guess it would for sure be your call if you would like to fit it or not.

Flor Bounhas - Contestar

Where can I get the screen?

Donald Peters - Contestar

Has anyone found out where you can purchase a screen at?

Lavella Coffey - Contestar

I think my Gear Fits screen wasnt working cuz upon opening it, I noticed large amounts of cocaine residue.

Josh Grosskreutz - Contestar

You guys can get the screen from joesge.com. Also, there are screws hidden on the bottom. This is an alternate way of opening it, but will require a Philips Head Screwdriver.

John Clark - Contestar

but how to you know how much it costs

AIDEN MONSEN - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 2

Ultimos 30 días: 15

Todo El Tiempo: 53,420