Introducción

This guide shall detail and illustrate how to replace the home button for a Samsung Galaxy Y in the situation of the home button not being responsive or broken.

  1. Use the blue plastic opening tool to pry the back-panel off of the device.
    • Use the blue plastic opening tool to pry the back-panel off of the device.

  2. Use the screwdriver with a Phillips #000 screwdriver head to remove the four 5mm screws located in the corner of the interior back panel.
    • Use the screwdriver with a Phillips #000 screwdriver head to remove the four 5mm screws located in the corner of the interior back panel.

    • Remove the SD card as well by sliding the card out of it's slot.

    • Use the metal pry tool to separate the interior back panel from the interior hardware and screen.

    • Using a metal spudger may cause further damage to your device.

    • Disconnect the orange motherboard connection, then remove the interior hardware from the front screen display.

    • Remove the Home Button from the device.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 5

Últimos 30 Días: 34

Todo El Tiempo: 59