Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Introducción

If you need additional space to hold data like music, photos or games (among other things) you may need to insert an SD card into the device.

Partes

No se especificaron partes.

  1. Locate the small hole on the right side of the device.
    • Locate the small hole on the right side of the device.

  2. Using the tool supplied with the Galaxy Tab, insert the pointed end into the hole on the side of the device. Apply pressure until the plastic SD card slot pops out.
    • Using the tool supplied with the Galaxy Tab, insert the pointed end into the hole on the side of the device.

    • Apply pressure until the plastic SD card slot pops out.

    • Gently pull out the plastic insert completely.

  3. Insert the Micro SD Card in the plastic insert, and replace it into the device.
    • Insert the Micro SD Card in the plastic insert, and replace it into the device.

    • This device can only handle SD cards with memory up to 64 GB.

Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

Jovina Martinez

Miembro Desde 20/01/16

1,873 Reputación

7 Guías creadas

Equipo

USF Tampa, Team 10-4, Remmell Spring 2016 Miembro de USF Tampa, Team 10-4, Remmell Spring 2016

USFT-REMMELL-S16S10G4

4 Miembros

15 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 17

Ultimos 30 días: 63

Todo El Tiempo: 2,915