Saltar al contenido principal

Introducción

If one or both speakers on your tablet are not working properly, this guide will walk you through how to easily replace them.

  1. Begin by separating the back panel from the screen glass assembly using the plastic opening tool.
    • Begin by separating the back panel from the screen glass assembly using the plastic opening tool.

  2. Continue around the entire device until the back panel is completely separated from the screen. Continue around the entire device until the back panel is completely separated from the screen.
    • Continue around the entire device until the back panel is completely separated from the screen.

  3. Use a Phillips #000 screwdriver to remove the 2.5mm Phillips head screw on the top part of the speaker. Use a Phillips #000 screwdriver to remove the 2.5mm Phillips head screw on the top part of the speaker. Use a Phillips #000 screwdriver to remove the 2.5mm Phillips head screw on the top part of the speaker.
    • Use a Phillips #000 screwdriver to remove the 2.5mm Phillips head screw on the top part of the speaker.

  4. Using your fingers, carefully remove the tab that connects the speaker to the motherboard. Using your fingers, carefully remove the tab that connects the speaker to the motherboard.
    • Using your fingers, carefully remove the tab that connects the speaker to the motherboard.

  5. Using your fingers, gently remove the speaker from its place. Using your fingers, gently remove the speaker from its place. Using your fingers, gently remove the speaker from its place.
    • Using your fingers, gently remove the speaker from its place.

  6. Use a Phillips #000 screwdriver to remove the 2.5mm Phillips head screw on top of the speaker. Use a Phillips #000 screwdriver to remove the 2.5mm Phillips head screw on top of the speaker. Use a Phillips #000 screwdriver to remove the 2.5mm Phillips head screw on top of the speaker.
    • Use a Phillips #000 screwdriver to remove the 2.5mm Phillips head screw on top of the speaker.

  7. Using your fingers, lift the tab that connects the speaker to the mother board. Using your fingers, lift the tab that connects the speaker to the mother board.
    • Using your fingers, lift the tab that connects the speaker to the mother board.

  8. Using a nylon spudger, gently lift the round piece that connects to the speaker and remove it from its place.
    • Using a nylon spudger, gently lift the round piece that connects to the speaker and remove it from its place.

  9. Using your fingers, gently remove the speaker from its place. Using your fingers, gently remove the speaker from its place.
    • Using your fingers, gently remove the speaker from its place.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Mario Montoya

Miembro Desde 12/09/16

225 Reputación

2 Guías creadas

Equipo

USF Tampa, Team 9-2, Lacy Fall 2016 Miembro de USF Tampa, Team 9-2, Lacy Fall 2016

USFT-LACY-F16S9G2

4 Miembros

10 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 3

Todo El Tiempo: 506