Repara tus cosas Comunidad Tienda

Samsung Galaxy Tab A 9.7 Headphone Jack Replacement

Introducción

This replacement guide will help you easily follow the steps in order to replace the headphone jack on a Samsung Galaxy Tab A 9.7. The difficulty of this guide is moderate and requires special attention to details.

The headphone jack is also a part of the charging port, so for clarification the part listed is both the charging port connected with the headphone jack.

Qué necesitas

  1. Samsung Galaxy Tab A 9.7 Headphone Jack Replacement, Headphone Jack: paso 1, imagen 1 de 1

    • Pry along the edge of the Samsung Galaxy Tab A 9.7 with an iFixit opening tool.

    Traducir

  2. Samsung Galaxy Tab A 9.7 Headphone Jack Replacement: paso 2, imagen 1 de 1

    • Insert a second iFixit opening tool along the edge and begin to pry open the back cover a little with each one.

    Traducir

  3. Samsung Galaxy Tab A 9.7 Headphone Jack Replacement: paso 3, imagen 1 de 1

    • Remove one of the opening tools and begin to go around the device with the other one until the back cover pops off.

    Traducir

  5. Samsung Galaxy Tab A 9.7 Headphone Jack Replacement: paso 4, imagen 1 de 1

    • Disconnect the strip from the motherboard with the iFixit opening tool.

    Traducir

  6. Samsung Galaxy Tab A 9.7 Headphone Jack Replacement: paso 5, imagen 1 de 2 Samsung Galaxy Tab A 9.7 Headphone Jack Replacement: paso 5, imagen 2 de 2

    • Remove five 2.8 mm screws using the Phillips #000 screwdriver.

    Traducir

  7. Samsung Galaxy Tab A 9.7 Headphone Jack Replacement: paso 6, imagen 1 de 2 Samsung Galaxy Tab A 9.7 Headphone Jack Replacement: paso 6, imagen 2 de 2

    • Remove both side pieces using one of the the iFixit opening tools.

    • Lift up the headphone jack port with the iFixit opening tool as well.

    Traducir

  8. Samsung Galaxy Tab A 9.7 Headphone Jack Replacement: paso 7, imagen 1 de 1

    • Pull up the headphone jack port carefully and replace.

    Traducir
Conclusión

To reassemble your device, follow the instructions in reverse order.

2 personas más completaron esta guía.

Autor

con 2 otros colaboradores

Justin Osborn

Miembro Desde 04/09/19

154 Reputación

1 Guía escrita

Insignias: 7

+ 4 más insignias

Equipo

IUPUI, Team S1-G3, Hovde Spring 2019 Miembro de IUPUI, Team S1-G3, Hovde Spring 2019

IUPUI-HOVDE-S19S1G3

3 Miembros

3 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 4

Todo El Tiempo: 398