Repara tus cosas Comunidad Tienda

Samsung Galaxy Tab A 7.0" Headphone Jack Replacement

Qué necesitas

  1. Samsung Galaxy Tab A 7.0" Headphone Jack Replacement, Headphone Jack: paso 1, imagen 1 de 1

    • Using the plastic opening tool, starting at any corner on the tablet, insert the tool between the back panel and the front panel.

    • Slide tool around the tablet to unlock the panels from one another.

    Editar

  2. Samsung Galaxy Tab A 7.0" Headphone Jack Replacement: paso 2, imagen 1 de 2 Samsung Galaxy Tab A 7.0" Headphone Jack Replacement: paso 2, imagen 2 de 2

    • Carefully remove the back panel from the front panel.

    • The inner components of the tablet will now be exposed.

    Editar

  4. Samsung Galaxy Tab A 7.0" Headphone Jack Replacement: paso 3, imagen 1 de 3 Samsung Galaxy Tab A 7.0" Headphone Jack Replacement: paso 3, imagen 2 de 3 Samsung Galaxy Tab A 7.0" Headphone Jack Replacement: paso 3, imagen 3 de 3

    • Remove the two Phillips head screws attaching the auxiliary port to the plastic frame using a P000 screwdriver.

    • Remove the four Phillips head screws attaching the motherboard to the plastic case using a P000 screwdriver.

    Editar

  5. Samsung Galaxy Tab A 7.0" Headphone Jack Replacement: paso 4, imagen 1 de 1

    • Using tweezers disconnect the headphone jack connector from the motherboard.

    Editar

  6. Samsung Galaxy Tab A 7.0" Headphone Jack Replacement: paso 5, imagen 1 de 3 Samsung Galaxy Tab A 7.0" Headphone Jack Replacement: paso 5, imagen 2 de 3 Samsung Galaxy Tab A 7.0" Headphone Jack Replacement: paso 5, imagen 3 de 3

    • Using tweezers, carefully lift up the motherboard.

    • Using tweezers, remove the metal jacket holding the headphone jack in place by grabbing the left corner where there is a recess to grab it.

    • There is a light adhesive holding the metal jacket down. You may have to pull slightly harder to get this off.

    Editar

  7. Samsung Galaxy Tab A 7.0" Headphone Jack Replacement: paso 6, imagen 1 de 1

    • Remove the auxiliary port from the case.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

5 personas más completaron esta guía.

Autor

con 3 otros colaboradores

Bradley Watson

Miembro Desde 02/15/17

1,079 Reputación

4 Guías creadas

Insignias: 12

+ 9 más insignias

Equipo

USF Tampa, Team 5-4, Passmore Spring 2017 Miembro de USF Tampa, Team 5-4, Passmore Spring 2017

USFT-PASSMORE-S17S5G4

3 Miembros

8 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 3

Ultimos 30 días: 38

Todo El Tiempo: 3,873