Samsung Galaxy Tab A 10.1 Back Panel Replacement

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Introducción

To replace other parts inside your Samsung Galaxy Tab A 10.1, you must first open up the device through the back. This guide will show you how to remove the back panel of the device.

Qué necesitas

Paso 1 Back Panel

Samsung Galaxy Tab A 10.1 Back Panel Replacement, Back Panel: paso 1, imagen 1 de 2

Samsung Galaxy Tab A 10.1 Back Panel Replacement, Back Panel: paso 1, imagen 2 de 2

Have the front of the device facing you.
Begin near one of the curved edges of the device (see photo two for visual example).
Place a plastic opening tool between the front and back panels.
If a plastic opening tool doesn’t work, using a metal spudger may work, but it may damage the plastic on the device.
Remember to remove the micro SD card (if present) before you begin.

Traducir

Paso 2

Once the plastic opening tool is fully inserted, wedge it around the device’s edges to separate the panels.
Lift the back panel off of the device.
The back panel will make a clicking noise while being lifted off of the device.