Saltar al contenido principal

Introducción

To replace other parts inside your Samsung Galaxy Tab A 10.1, you must first open up the device through the back. This guide will show you how to remove the back panel of the device.

Partes

  1. Samsung Galaxy Tab A 10.1 Back Panel Replacement, Back Panel: paso 1, imagen 1 de 2 Samsung Galaxy Tab A 10.1 Back Panel Replacement, Back Panel: paso 1, imagen 2 de 2
    • Have the front of the device facing you.

    • Begin near one of the curved edges of the device (see photo two for visual example).

    • Place a plastic opening tool between the front and back panels.

    • If a plastic opening tool doesn’t work, using a metal spudger may work, but it may damage the plastic on the device.

    • Remember to remove the micro SD card (if present) before you begin.

  2. Samsung Galaxy Tab A 10.1 Back Panel Replacement: paso 2, imagen 1 de 2 Samsung Galaxy Tab A 10.1 Back Panel Replacement: paso 2, imagen 2 de 2
    • Once the plastic opening tool is fully inserted, wedge it around the device’s edges to separate the panels.

    • Lift the back panel off of the device.

    • The back panel will make a clicking noise while being lifted off of the device.

Conclusión

To reassemble your device, follow these instructions in reverse order.

9 personas más completaron esta guía.

Isabella Li

Miembro Desde 02/10/17

2,248 Reputación

7 Guías creadas

Equipo

Cal Poly, Team S15-G6, Livingston Fall 2017 Miembro de Cal Poly, Team S15-G6, Livingston Fall 2017

CPSU-LIVINGSTON-F17S15G6

4 Miembros

26 Guías creadas

Un Comentario

Why need to remove cables when only the back has to be replaced ?

nabe_03 - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 3

Ultimos 7 días: 27

Ultimos 30 días: 106

Todo El Tiempo: 10,051