Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Place phone firmly between both hands with one hand flat on the back of the phone and pop off the back cover
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Once rear cover is off use small pastic spudger to lift battery out of the phone
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
After following how to remove the battery, unscrew the five 1.2mm Phillips Screws on the one back of the phone using screw driver. Use the J00 Phillips head screw bit to take out the screws
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Once screws are removed turn the phone over and use the plastic opening tool and unclip the connector holding the screen to the motherboard.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Us the plastic opening tool to pry apart the screen from the plastic. Start from one side and work your way around the whole phone.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Unscrew the 1.2mm Phillip screw that connects the motherboard to the rest of the phone. Then by using your thumbs pop the inners of the phone out. Also use same J00 Phillips head bit from prior steps.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use plastic tools to grab hold of one side of the speaker on the motherboard, and then gently lift. There is nothing holding the speakers, so it should come right off.
-
Cancelar: No complete esta guía.
4 personas más completaron esta guía.
Equipo
UMass Dartmouth, Team 7-2, Catania Spring 2016 Miembro de UMass Dartmouth, Team 7-2, Catania Spring 2016
UMASSD-CATANIA-S16S7G2
3 Miembros
5 Guías creadas
