Samsung Galaxy SIII Mini Display Assembly Replacement

Introducción

If the touch screen / digitizer / glass or the LCD display is broken, this manual will show you, how to disassemble the phone and replace the Display Assembly without frame.

[text|align=center]

_______________________________________ Video tutorial _______________________________________

Qué necesitas

Resumen del Video

Paso 1 Display Assembly

Samsung Galaxy SIII Mini Display Assembly Replacement, Display Assembly: paso 1, imagen 1 de 2

Samsung Galaxy SIII Mini Display Assembly Replacement, Display Assembly: paso 1, imagen 2 de 2

LCD Display + Touch screen (Display Assemblay) for Samsung Galaxy S III mini / i8190.
Switch off the phone, remove the battery and any SIM and memory card.

Editar

Paso 2

Samsung Galaxy SIII Mini Display Assembly Replacement: paso 2, imagen 3 de 3

Remove 10x Phillips screws.
With a plastic tool remove the Middle frame.

Editar

Screw size is PH00, and they're all the same size, so don't worry about getting any of them mixed up! :)

Craig Jessup - 2 de abr. de 2015 Contestar

Paso 3

Samsung Galaxy SIII Mini Display Assembly Replacement: paso 3, imagen 3 de 3

Disconnect:
Menu buttons flex cable
Micro SD Card reader flex cable
Lift up slightly the mother board from the right edge.
Unstick the Earpiece and Main camera from the display frame. Be careful, don't break flex cables.
Now disconnect the LCD Display flex cable which is located on the underside of the board.

Editar

Paso 4

Front camera
Main / Rear camera
Earpiece
Loudspeaker
Vibro motor
Micro SD Card reader

Editar

Paso 5

Samsung Galaxy SIII Mini Display Assembly Replacement: paso 5, imagen 3 de 3

Let's test the new spare part.
First connect the Display assembly, grab the phone comfortably and then put the battery.

Editar

Paso 6

Samsung Galaxy SIII Mini Display Assembly Replacement: paso 6, imagen 3 de 3

Warm the touchscreen to make adhesive tape soft. You can use a hair dryer.
If the glass is cracked, put the tape in order not to scatter pieces.
Use the front camera hole to separate the glass at the corner.
Continue with separation with plastic tools, from up to down.

Editar

Paso 7

Samsung Galaxy SIII Mini Display Assembly Replacement: paso 7, imagen 3 de 3

Gently separate the menu buttons flex cable from the touchscreen.

Editar

Paso 8

Samsung Galaxy SIII Mini Display Assembly Replacement: paso 8, imagen 3 de 3

If the display is left on the frame, use the same techniques to remove it.

Editar

Paso 9

Samsung Galaxy SIII Mini Display Assembly Replacement: paso 9, imagen 3 de 3

Clean the frame from the remnants of tape and install new.
Be careful with the menu buttons and the holes for the camera and the light sensor, don't cover them.

Editar