Saltar al contenido principal
  1. Remove back cover.
    • Remove back cover.

  2. Remove battery. If you have SIM card and SD card in, remove them by the way.
    • Remove battery. If you have SIM card and SD card in, remove them by the way.

  3. Open this cover and release the home button flex connector. Open this cover and release the home button flex connector.
    • Open this cover and release the home button flex connector.

  4. Kits del Apple Watch

    Screen and battery repairs just got easier.

    Comprar Ahora

    Kits del Apple Watch

    Screen and battery repairs just got easier.

    Comprar Ahora
  5. Heat the screen, cut the sticker under it and release the screen connector. Please be careful with the screen flex when sliding to cut the sticker. Heat the screen, cut the sticker under it and release the screen connector. Please be careful with the screen flex when sliding to cut the sticker. Heat the screen, cut the sticker under it and release the screen connector. Please be careful with the screen flex when sliding to cut the sticker.
    • Heat the screen, cut the sticker under it and release the screen connector. Please be careful with the screen flex when sliding to cut the sticker.

  6. Remove the LCD screen from rear case. Remove the LCD screen from rear case.
    • Remove the LCD screen from rear case.

  7. Remove all the screws. Remove all the screws.
    • Remove all the screws.

  8. Get loosen the touch keys from adhesive, and then push the mid-plate out from the middle housing. Get loosen the touch keys from adhesive, and then push the mid-plate out from the middle housing.
    • Get loosen the touch keys from adhesive, and then push the mid-plate out from the middle housing.

  9. Twist off these two screws and remove the whole motherboard assembly. Twist off these two screws and remove the whole motherboard assembly.
    • Twist off these two screws and remove the whole motherboard assembly.

  10. Release the connector,loose the assembly from adhesive and remove it finally. Release the connector,loose the assembly from adhesive and remove it finally. Release the connector,loose the assembly from adhesive and remove it finally.
    • Release the connector,loose the assembly from adhesive and remove it finally.

Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

Sophia

Miembro Desde 25/03/14

42,074 Reputación

62 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 2

Últimos 7 Días: 4

Últimos 30 Días: 20

Todo El Tiempo: 4,520