Saltar al contenido principal

Introducción

Use this guide to replace a damaged rear case on your Samsung Galaxy S4.

  1. Pry with a plastic opening tool, or your fingernail, in the divot to the left of the rear-facing camera, near the power button. Pry with a plastic opening tool, or your fingernail, in the divot to the left of the rear-facing camera, near the power button.
    • Pry with a plastic opening tool, or your fingernail, in the divot to the left of the rear-facing camera, near the power button.

  2. Lift the rear case by the corner nearest the divot and remove it from the phone. Lift the rear case by the corner nearest the divot and remove it from the phone. Lift the rear case by the corner nearest the divot and remove it from the phone.
    • Lift the rear case by the corner nearest the divot and remove it from the phone.

    Where is the divot? Please let me know that

    James - Contestar

    I purchased a blue plastic opening tool(AKA: Spudge) like the one used in the above Step 1 rear cover pic and found the divot and was able to take off the rear cover as per the “Step 2 “ instructions.

    Terry Crawford, Jr. - Contestar

Conclusión

To reassemble your device, follow these instructions in reverse order.

24 personas más completaron esta guía.

Sam Goldheart

Miembro Desde 18/10/12

448,560 Reputación

547 Guías creadas

Equipo

iFixit Miembro de iFixit

Community

146 Miembros

17,274 Guías creadas

Un Comentario

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 4

Ultimos 30 días: 18

Todo El Tiempo: 10,570