Saltar al contenido principal

Introducción

If you're finding that you cannot install anything new or save any pictures it is most likely due to the fact that the memory card on the phone is full.

  1. Press and hold the END key to power the phone down.
    • Press and hold the END key to power the phone down.

  2. Remove the back cover of the cell phone using a plastic opening tool.
    • Remove the back cover of the cell phone using a plastic opening tool.

  3. Pry the battery out using a plastic opening tool.
    • Pry the battery out using a plastic opening tool.

  4. Using a nylon spudger, push through the hole at the top of the memory card holder to slide it out.
    • Using a nylon spudger, push through the hole at the top of the memory card holder to slide it out.

Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

Arletty

Miembro Desde 25/09/14

1,049 Reputación

2 Guías creadas

Equipo

USF Tampa, Team 9-2, Blackwell Fall 2014 Miembro de USF Tampa, Team 9-2, Blackwell Fall 2014

USFT-BLACKWELL-F14S9G2

5 Miembros

11 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 6

Todo El Tiempo: 4,193