Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Locate the small slit on the bottom edge of the device between the back and front cases.
-
Pop the back case off by inserting your finger and pulling the case away from the phone.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the battery by pushing the bottom edge of the battery up and away from the phone
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove SIM card by pushing down and away from the slot, then pulling it out toward the bottom edge of the phone.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the seven 4.5 mm Phillips #00 screws along the perimeter of the phone.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Staring near the power button, use a plastic opening tool to disengage the plastic clips securing the midframe.
-
-
Este paso está sin traducir. Ayuda a traducirlo
Herramienta utilizada en este paso:Tweezers$4.99-
Disconnect the antenna using Tweezers. Do the lower end first, and then the upper.
-
Do the lower end first, and then the upper.
-
Pull the antenna cable out.
-