Saltar al contenido principal

Samsung Galaxy S Blaze Volume Rocker Replacement

Qué necesitas

  1. Samsung Galaxy S Blaze Volume Rocker  Replacement, Volume Rocker: paso 1, imagen 1 de 1
    • Start by removing the back plate to expose the battery by pulling the back and front plates apart.

  2. Samsung Galaxy S Blaze Volume Rocker  Replacement: paso 2, imagen 1 de 1
    • Remove the battery from the device and set aside.

  3. Samsung Galaxy S Blaze Volume Rocker  Replacement: paso 3, imagen 1 de 2 Samsung Galaxy S Blaze Volume Rocker  Replacement: paso 3, imagen 2 de 2
    • Using a Phillips Head Screwdriver size 00. Remove all eight 4mm screws from the frame.

    • The eight screws are all the same size.

  4. Samsung Galaxy S Blaze Volume Rocker  Replacement: paso 4, imagen 1 de 1
    • Remove the frame from the phone by prying it off with the iFixit blue plastic opening tool.

    • Work around the phone with the tool until the frame is off.

    • You may need to use a bit of force to pry off the frame.

  5. Samsung Galaxy S Blaze Volume Rocker  Replacement: paso 5, imagen 1 de 2 Samsung Galaxy S Blaze Volume Rocker  Replacement: paso 5, imagen 2 de 2
    • The volume rocker is held into the frame by two small prongs.

    • Carefully unhook the prongs from the frame by pulling to the side and remove the volume rocker.

    • The prongs on the volume rocker look like this.

Conclusión

To reassemble your device, follow these instructions in reverse order.

If there is something wrong with your device, try this: Samsung Galaxy S Blaze 4G Troubleshooting

Una persona más ha completado esta guía.

Jake Best

Miembro Desde 03/05/15

261 Reputación

2 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 7

Todo El Tiempo: 296