Saltar al contenido principal

Samsung Galaxy S Blaze Frame Replacement

Sólo Prerrequisito
Esta guía solo debería usarse como prerrequisito para otras guías. Por tanto, estará incompleta.

Qué necesitas

  1. Samsung Galaxy S Blaze Frame Replacement, Backplate: paso 1, imagen 1 de 1
    • Turn the phone over so the back is facing you.

  2. Samsung Galaxy S Blaze Frame Replacement: paso 2, imagen 1 de 3 Samsung Galaxy S Blaze Frame Replacement: paso 2, imagen 2 de 3 Samsung Galaxy S Blaze Frame Replacement: paso 2, imagen 3 de 3
    • Hold phone to see notch on the side of the back plate.

    • Apply pressure to the back plate to remove the back plate.

  3. Samsung Galaxy S Blaze Frame Replacement, Battery: paso 3, imagen 1 de 3 Samsung Galaxy S Blaze Frame Replacement, Battery: paso 3, imagen 2 de 3 Samsung Galaxy S Blaze Frame Replacement, Battery: paso 3, imagen 3 de 3
    • Using your index finger, pull the top of the battery. Then pull the battery towards you.

    • The battery will fall out easily.

  4. Samsung Galaxy S Blaze Frame Replacement, Frame: paso 4, imagen 1 de 2 Samsung Galaxy S Blaze Frame Replacement, Frame: paso 4, imagen 2 de 2
    • Remove the eight 4 mm screws from the frame using a Phillips #00 screwdriver.

  5. Samsung Galaxy S Blaze Frame Replacement: paso 5, imagen 1 de 3 Samsung Galaxy S Blaze Frame Replacement: paso 5, imagen 2 de 3 Samsung Galaxy S Blaze Frame Replacement: paso 5, imagen 3 de 3
    • Insert the blue plastic opening tool between the frame and the device.

    • Push down on the tool to raise up the frame from the device.

    • Work around the device until the frame is completely off.

    • You may need to use some force to pry the frame off of the device.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 257