Repara tus cosas

Derecho a reparar

Tienda

Samsung Galaxy Note Pro 12.2 Audio Jack Replacement

Escrito Por: Tina Kong (y 2 de otros participantes)
  • Comentarios: 0
  • Favoritos: 0

Dificultad

Moderado

Pasos

7

Tiempo Requerido

15 minutos

Secciones

1

Banderas

0

Introducción

If you are having trouble with using your headphones, you may need to replace your audio jack. This guide will show you how to safely replace the audio jack in your device.

  1. Make sure that your device is powered off before starting your repair.

    • Make sure that your device is powered off before starting your repair.

    • Carefully remove the back cover with the blue opening tool.

    • It is best to start with one corner and work your way around the device slowly.

    Editar

  2. Remove the two 3mm Phillips #00 screws securing in the white cover over the audio jack. Remove the two 3mm Phillips #00 screws securing in the white cover over the audio jack.

    • Remove the two 3mm Phillips #00 screws securing in the white cover over the audio jack.

    Editar

  3. Remove the white cover over the audio jack with the plastic opening tool by pushing up on the black connecter.

    • Remove the white cover over the audio jack with the plastic opening tool by pushing up on the black connecter.

    Editar

  5. Remove the two 3mm Phillips #00 screws over the silver cover. The silver cover is attached to the whole audio jack; do not try to pull this away by itself.

    • Remove the two 3mm Phillips #00 screws over the silver cover.

    • The silver cover is attached to the whole audio jack; do not try to pull this away by itself.

    Editar

  6. Pop up the green connecter by gently pulling up. Pop up the green connecter by gently pulling up.

    • Pop up the green connecter by gently pulling up.

    Editar

  7. Pull up on the circular amp with the spudger tool to release it from the device. Pull up on the circular amp with the spudger tool to release it from the device.

    • Pull up on the circular amp with the spudger tool to release it from the device.

    Editar

  8. Remove the whole audio jack by pulling gently up on the copper piece.

    • Remove the whole audio jack by pulling gently up on the copper piece.

    • This component is extremely fragile.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar un comentario

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 11

Todo El Tiempo: 485