Repara tus cosas Comunidad Tienda

Samsung Galaxy Note 10.1 microSD Port Replacement

Qué necesitas

  1. Samsung Galaxy Note 10.1 microSD Port Replacement, Removing the Top Piece: paso 1, imagen 1 de 3 Samsung Galaxy Note 10.1 microSD Port Replacement, Removing the Top Piece: paso 1, imagen 2 de 3 Samsung Galaxy Note 10.1 microSD Port Replacement, Removing the Top Piece: paso 1, imagen 3 de 3

    • This is the back of the device and where you willl begin to take it apart

    • It is necessary to remove the silver piece covering the camera first before removing the bigger back piece.

    • Use the plastic opening tools to pry along the indicated box.

    • Lift up the silver piece to reveal the rest of the back cover.

    Traducir

  3. Samsung Galaxy Note 10.1 microSD Port Replacement, Removing the Back Cover: paso 2, imagen 1 de 3 Samsung Galaxy Note 10.1 microSD Port Replacement, Removing the Back Cover: paso 2, imagen 2 de 3 Samsung Galaxy Note 10.1 microSD Port Replacement, Removing the Back Cover: paso 2, imagen 3 de 3

    • Unscrew the three 5 mm screws indicated by the red circles with the Philips #00 screwdriver.

    • Using the plastic opening tools pry along the bottom of the device, moving to the sides of the cover to the top.

    • Remove the back cover.

    • At this point use anti-static gloves or do NOT take it apart on carpet.

    Traducir

  4. Samsung Galaxy Note 10.1 microSD Port Replacement, Removing the microSD Port: paso 3, imagen 1 de 3 Samsung Galaxy Note 10.1 microSD Port Replacement, Removing the microSD Port: paso 3, imagen 2 de 3 Samsung Galaxy Note 10.1 microSD Port Replacement, Removing the microSD Port: paso 3, imagen 3 de 3

    • Unscrew the two 2 mm screws indicated by the red circles with the #00 Philips Screwdriver.

    • Starting with the black motherboard connector, remove the module indicated by the red box in the second picture.

    • Replace the microSD port with a similar model.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

5 personas más completaron esta guía.

Autor

con 4 otros colaboradores

Tyler Salomone

Miembro Desde 09/22/14

1,020 Reputación

3 Guías creadas

Insignias: 13

+ 10 más insignias

Equipo

USF Tampa, Team 3-7, Brown Fall 2014 Miembro de USF Tampa, Team 3-7, Brown Fall 2014

USFT-BROWN-F14S3G7

3 Miembros

9 Guías creadas

2 comentarios

Be sure to include screw lengths to the nearest mm on all guides.

Dan Brown - Contestar

In this guide, you missed a step on removing the battery.

John Peterson - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 3

Todo El Tiempo: 3,888