Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
This is the back of the device and where you willl begin to take it apart
-
It is necessary to remove the silver piece covering the camera first before removing the bigger back piece.
-
Use the plastic opening tools to pry along the indicated box.
-
Lift up the silver piece to reveal the rest of the back cover.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Unscrew the three screws indicated by the red circles with the Philips #00 screwdriver.
-
Using the plastic opening tools pry along the bottom of the device, moving to the sides of the cover to the top.
-
Remove the back cover.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Start by lifting the white connector to remove the part indicated by the red polygon.
-
Gently pry along the camera hub to lift it out of its location.
-
This is your camera. Replace it with the new part.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
To remove the front-facing camera, start by lifting the white connector to remove the part indicated by the marker.
-
Gently pull the front-facing camera out of its casing.
-
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.
Equipo
Idaho State University, Team S1-G4, Watkins Fall 2019 Miembro de Idaho State University, Team S1-G4, Watkins Fall 2019
ISU-WATKINS-F19S1G4
3 Miembros
2 Guías creadas
