Saltar al contenido principal

Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.

Qué necesitas

  1. Este paso está sin traducir. Ayuda a traducirlo

    : paso 1, imagen 1 de 2 : paso 1, imagen 2 de 2
    Herramienta utilizada en este paso:
    Spudger
    $2.99
    Comprar
    • Using the nylon spudger or plastic opening tool along the edges of the screen, separate the back case off of the device.

    • If possible, consider using the black nylon spudger for a gentler separation.

  2. Este paso está sin traducir. Ayuda a traducirlo

    : paso 2, imagen 1 de 2 : paso 2, imagen 2 de 2
    • Remove the three 3mm screws on the top right side of the device with the Phillips PH000 screw head.

    • Remove the one 3mm screw on the top left side of the device with the same method.

  3. Este paso está sin traducir. Ayuda a traducirlo

    : paso 3, imagen 1 de 3 : paso 3, imagen 2 de 3 : paso 3, imagen 3 de 3
    • Remove the gray rubber piece.

    • Use a spudger or fingernail to disconnect the blue antenna cable from the motherboard.

    • Remove the right speaker unit.

  4. Este paso está sin traducir. Ayuda a traducirlo

    : paso 4, imagen 1 de 3 : paso 4, imagen 2 de 3 : paso 4, imagen 3 de 3
    • Remove the loudspeaker modules located on the parts where the screws were removed by using the black nylon spudger.

    • They are the black pieces at the top left and right corners of the device that have metal squares on them in the middle.

  5. Este paso está sin traducir. Ayuda a traducirlo

    : paso 5, imagen 1 de 1
    • Place your finger on the thin black bar at the end of the ribbon tape and flip each one up.

    • Gently pull the ribbon tape on the battery away from the bar. Repeat this process for the second ribbon tape.

  6. Este paso está sin traducir. Ayuda a traducirlo

    : paso 6, imagen 1 de 1
    Herramienta utilizada en este paso:
    Phillips #000 Screwdriver
    $5.49
    Comprar
  7. Este paso está sin traducir. Ayuda a traducirlo

    : paso 7, imagen 1 de 2 : paso 7, imagen 2 de 2
    Herramienta utilizada en este paso:
    Spudger
    $2.99
    Comprar
    • Lift up the battery from the bottom and situate the black nylon spudger underneath the battery.

    • Use the black nylon spudger to disconnect the multi-colored wires from the rest of the device.

  8. Este paso está sin traducir. Ayuda a traducirlo

    : paso 8, imagen 1 de 3 : paso 8, imagen 2 de 3 : paso 8, imagen 3 de 3
    • Disconnect all cables on the motherboard.

    • See our connector guide for help safely disconnecting various types of connectors.

  9. Este paso está sin traducir. Ayuda a traducirlo

    : paso 9, imagen 1 de 3 : paso 9, imagen 2 de 3 : paso 9, imagen 3 de 3
    • Use the black nylon spudger to gently lift the motherboard away from the frame.

    • Remove the motherboard.

Linea de Meta

7 personas más completaron esta guía.

Joseph Rasico

Miembro Desde 02/20/17

2,173 Reputación

6 Guías creadas

Equipo

USF Tampa, Team S1-G6, Leahy Spring 2017 Miembro de USF Tampa, Team S1-G6, Leahy Spring 2017

USFT-LEAHY-S17S1G6

3 Miembros

6 Guías creadas

5 comentarios

pls how do i get a motherboard to fix my samsung galaxy tab 10.1 2014 version

joshua - Contestar

hi. i have one of this tablets and i need a ic guide for it. something like this link :

Samsung Galaxy Note 10.1 Teardown

this like is for galaxy note 10.1 2012 but i need it for 2014 (SM-P601).

any documents or files to help me recognize which Chip do what ?

Amir Hoseini - Contestar

Can I use this motherboard with Galaxy note 10.1 GT-N8000 ? Plz reply fast

لونا العروي - Contestar

Can I use this motherboard with Galaxy Note 10.1 GT-N8000 ? Plz reply fast

لونا العروي - Contestar

miss 1 screw when removing the motherboard on the center right side

Basnendar Eko Prabowo - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 16

Ultimos 30 días: 49

Todo El Tiempo: 10,042