Saltar al contenido principal

Samsung Galaxy Media Player 5 Earpiece Speaker Replacement

Qué necesitas

  1. Samsung Galaxy Media Player 5 Earpiece Speaker Replacement, Earpiece Speaker: paso 1, imagen 1 de 2 Samsung Galaxy Media Player 5 Earpiece Speaker Replacement, Earpiece Speaker: paso 1, imagen 2 de 2
    • Remove the SD Memory Card before working on the device.

    • Use a Phillips screwdriver to remove the 10 mm screw near the SD Memory Card port.

  2. Samsung Galaxy Media Player 5 Earpiece Speaker Replacement: paso 2, imagen 1 de 1
    • White caps cover screws on both sides of the charging port. Use the angled tweezers to remove them.

    • Use a blow dryer on low heat if necessary to loosen the adhesive.

  3. Samsung Galaxy Media Player 5 Earpiece Speaker Replacement: paso 3, imagen 1 de 2 Samsung Galaxy Media Player 5 Earpiece Speaker Replacement: paso 3, imagen 2 de 2
    • Using a Phillips head screwdriver, unscrew the two 10 mm screws located on either side of the charging port.

  4. Samsung Galaxy Media Player 5 Earpiece Speaker Replacement: paso 4, imagen 1 de 3 Samsung Galaxy Media Player 5 Earpiece Speaker Replacement: paso 4, imagen 2 de 3 Samsung Galaxy Media Player 5 Earpiece Speaker Replacement: paso 4, imagen 3 de 3
    • Using the opening pick, pry at the bottom and work around each edge of the device until the front cover and back cover housing is separated.

    • You will hear a popping sound to indicate the separation.

  5. Samsung Galaxy Media Player 5 Earpiece Speaker Replacement: paso 5, imagen 1 de 2 Samsung Galaxy Media Player 5 Earpiece Speaker Replacement: paso 5, imagen 2 de 2
    • Using the plastic opening tool, apply an upward force to detach the battery and the tab attached to it.

  6. Samsung Galaxy Media Player 5 Earpiece Speaker Replacement: paso 6, imagen 1 de 3 Samsung Galaxy Media Player 5 Earpiece Speaker Replacement: paso 6, imagen 2 de 3 Samsung Galaxy Media Player 5 Earpiece Speaker Replacement: paso 6, imagen 3 de 3
    • Using the plastic opening tool, apply an upward force to detach the speaker earpiece.

    • Use the tweezers to attach the new earpiece speaker in place of the original.

    • Use a blow dryer, on low heat settings, to loosen the adhesive on the speaker earpiece.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

China Ayala

Miembro Desde 03/05/15

584 Reputación

4 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 2

Todo El Tiempo: 374