Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

  1. Flip the phone over and use your fingernail or an opening tool to remove the back cover. Flip the phone over and use your fingernail or an opening tool to remove the back cover. Flip the phone over and use your fingernail or an opening tool to remove the back cover.
    • Flip the phone over and use your fingernail or an opening tool to remove the back cover.

  2. Remove the battery. If your phone has a SIM card or MicroSD card, remove them.
    • Remove the battery.

    • If your phone has a SIM card or MicroSD card, remove them.

  3. Remove the 9 Phillips #00 screws from the mid-frame.
    • Remove the 9 Phillips #00 screws from the mid-frame.

  4. Use an opening pick to pry off the mid frame. Use an opening pick to pry off the mid frame.
    • Use an opening pick to pry off the mid frame.

  5. Disconnect the following ribbon cables from the motherboard: The digitizer and LCD assembly.
    • Disconnect the following ribbon cables from the motherboard:

    • The digitizer and LCD assembly.

    • Headphone Jack and Earpiece.

    • Daughter board flex cable.

    • Antenna connector.

  6. Use a plastic opening tool to remove the motherboard. Use a plastic opening tool to remove the motherboard. Use a plastic opening tool to remove the motherboard.
    • Use a plastic opening tool to remove the motherboard.

  7. Remove the single Phillips screw that secures the daughterboard. Remove the daughterboard. The flex cable is glued, so exercise extreme caution, as excessive force can damage the cable.
    • Remove the single Phillips screw that secures the daughterboard.

    • Remove the daughterboard.

    • The flex cable is glued, so exercise extreme caution, as excessive force can damage the cable.

  8. Use an opening pick to remove the audio jack. Use an opening pick to remove the audio jack. Use an opening pick to remove the audio jack.
    • Use an opening pick to remove the audio jack.

  9. Disconnect the digitizer's ribbon cable. Disconnect the digitizer's ribbon cable.
    • Disconnect the digitizer's ribbon cable.

  10. Push the earpiece mesh outwards to release it.
    • Push the earpiece mesh outwards to release it.

  11. Use a heat gun or an iOpener to heat the digitizer and soften the glue securing it.
    • Use a heat gun or an iOpener to heat the digitizer and soften the glue securing it.

    • Use an opening pick to break up the glue around the edges of the digitizer.

    • You may apply more heat if needed.

    • Remove the digitizer and any broken glass.

Conclusión

To reassemble your device, follow these instructions in reverse order.

88 personas más completaron esta guía.

ivan coene

Miembro Desde 12/03/14

2,985 Reputación

2 Guías creadas

yes, but where can I buy the screen replacement?

Roxannie - Contestar

I bought it on Ebay...

ivan coene - Contestar

Comment root galaxy core prime g361f android 5.1.1

soulaemen - Contestar

Follow the instructions in reverse order? Do you need glue for the new screen? What kind of glue? How is it applied?

Thomas McGuigan - Contestar

Nor do they show how the new digitizer plugs in...

chris smith -

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 4

Ultimos 30 días: 41

Todo El Tiempo: 115,907