Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Turn the smartphone off by using the power button on the right-hand side.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Turn the smartphone over so that the rear camera is face up.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use your fingernail or a flat tool to lift the back cover.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Locate the battery near the bottom of the phone. The battery is square, flat, and is labeled 'SAMSUNG'.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use your fingernail or a flat tool to lift the battery out.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use a Phillips #00 screwdriver to remove the eight 4 mm screws that secure the midframe.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Heat the frame with a hair dryer or heat gun. Do this until the adhesive is loosened.
-
-
Este paso está sin traducir. Ayuda a traducirlo
Herramienta utilizada en este paso:iFixit Opening Tool$1.99-
Use a flat tool or the iFixit Opening Tool to lift the midframe.
-
-
Este paso está sin traducir. Ayuda a traducirlo
Herramienta utilizada en este paso:Tweezers$4.99-
Disconnect the LCD screen/touch screen ribbon from the motherboard using tweezers.
-
-
Este paso está sin traducir. Ayuda a traducirlo
Herramienta utilizada en este paso:iFixit Opening Tool$1.99-
Lift the motherboard out using the iFixit Opening Tool.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Heat the sides of the screen with a heat gun or hair dryer.
-
-
Este paso está sin traducir. Ayuda a traducirlo
Herramienta utilizada en este paso:iFixit Opening Tool$1.99-
Use the iFixit Opening Tool to remove the plastic panel that separates the motherboard and the screen.
-
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.