Saltar al contenido principal

Partes

No se especificaron partes.

  1. Begin removing the 3/16" screws for the device.
    • Begin removing the 3/16" screws for the device.

  2. Turn the device and remove the additional 3/16" screws.
    • Turn the device and remove the additional 3/16" screws.

  3. Turn the device and remove the additional 3/16" screw.
    • Turn the device and remove the additional 3/16" screw.

  4. Take the white cover plate off. Take the white cover plate off. Take the white cover plate off.
    • Take the white cover plate off.

  5. Using the plastic opening tools, pry open the camera from the bottom.
    • Using the plastic opening tools, pry open the camera from the bottom.

    • This may require a moderate use of force because of the sealing glue.

  6. Gently pull the connector away from the motherboard.
    • Gently pull the connector away from the motherboard.

    Help! I can't get this connector back in place! How did you do it?

    Thanks!

    rotraut geringer - Contestar

    Got it finally - and it's working again, I can't believe it! Thank you so much for the instructions!!!!

    rotraut geringer - Contestar

  7. Unscrew the motherboard's screws. There are 4 3/32" screws and 3 5/32" screws.
    • Unscrew the motherboard's screws. There are 4 3/32" screws and 3 5/32" screws.

  8. Unscrew the lens' screws. There are 1 black 4/32" screw, 3 3/16" black screws, and 2 white 5/32" screws.
    • Unscrew the lens' screws. There are 1 black 4/32" screw, 3 3/16" black screws, and 2 white 5/32" screws.

    This seems to be wrong. Only 2 screws connect the lens to the camera body - if you unscrew the others, you open up the lens and there is no need to do so.

    NOVOMOTION J. H. - Contestar

  9. Pull these connectors away from motherboard.
    • Pull these connectors away from motherboard.

  10. Lift the motherboard and lens out of the case.
    • Lift the motherboard and lens out of the case.

Conclusión

To reassemble your device, follow these instructions in reverse order.

10 personas más completaron esta guía.

Richard Hicks

Miembro Desde 13/01/15

1,262 Reputación

4 Guías creadas

Equipo

USF Tampa, Team 1-3, Sullivan Winter 2015 Miembro de USF Tampa, Team 1-3, Sullivan Winter 2015

USFT-SULLIVAN-W15S1G3

3 Miembros

4 Guías creadas

Un Comentario

Hey mate, what do you do after the motherboard replacement? Just turn the camera on? Do you need to do a master reset?

Sam - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 1

Todo El Tiempo: 4,650