Saltar al contenido principal

Samsung Galaxy A10 Charging Port Replacement

Resumen del Video

  1. Samsung Galaxy A10 Charging Port Replacement, Remove the back cover: paso 1, imagen 1 de 3 Samsung Galaxy A10 Charging Port Replacement, Remove the back cover: paso 1, imagen 2 de 3 Samsung Galaxy A10 Charging Port Replacement, Remove the back cover: paso 1, imagen 3 de 3
    • Remove the SIM Tray.

    • Use plastic tools to separate the back cover.

  2. Samsung Galaxy A10 Charging Port Replacement: paso 2, imagen 1 de 3 Samsung Galaxy A10 Charging Port Replacement: paso 2, imagen 2 de 3 Samsung Galaxy A10 Charging Port Replacement: paso 2, imagen 3 de 3
    • Remove the silver Phillips screws to be able to disassemble the motherboard shields.

  3. Samsung Galaxy A10 Charging Port Replacement: paso 3, imagen 1 de 3 Samsung Galaxy A10 Charging Port Replacement: paso 3, imagen 2 de 3 Samsung Galaxy A10 Charging Port Replacement: paso 3, imagen 3 de 3
    • Disconnect the battery.

    • Remove the screws and the charging board shield.

  4. Samsung Galaxy A10 Charging Port Replacement, Remove the charging board: paso 4, imagen 1 de 2 Samsung Galaxy A10 Charging Port Replacement, Remove the charging board: paso 4, imagen 2 de 2
    • Disconnect the Main flex cable and the coaxial antenna cables and remove the charging board.

  5. Samsung Galaxy A10 Charging Port Replacement: paso 5, imagen 1 de 3 Samsung Galaxy A10 Charging Port Replacement: paso 5, imagen 2 de 3 Samsung Galaxy A10 Charging Port Replacement: paso 5, imagen 3 de 3
    • Cover the microphone hole to prevent microphone damage.

    • Use hot air to remove the Micro USB connector.

  6. Samsung Galaxy A10 Charging Port Replacement: paso 6, imagen 1 de 3 Samsung Galaxy A10 Charging Port Replacement: paso 6, imagen 2 de 3 Samsung Galaxy A10 Charging Port Replacement: paso 6, imagen 3 de 3
    • Clean the tin and install the new charging connector.

  7. Samsung Galaxy A10 Charging Port Replacement: paso 7, imagen 1 de 2 Samsung Galaxy A10 Charging Port Replacement: paso 7, imagen 2 de 2
    • Clean the board and test the device.

Conclusión

To reassemble your device, follow these instructions in reverse order.

11 personas más completaron esta guía.

ZFix

Miembro Desde 12/09/13

191,368 Reputación

330 Guías creadas

Equipo

Master Techs Miembro de Master Techs

Community

322 Miembros

2,545 Guías creadas

Un comentario

Waste of time unless you're obsessed with soldering. Just buy a complete board. Cheaper, easier and quicker.

[deleted] - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 5

Ultimos 7 días: 44

Ultimos 30 días: 216

Todo El Tiempo: 7,118