Esta versión puede contener ediciones incorrectas. Cambiar a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Using the Phillips #00 screwdriver, remove the phone's battery.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove six (4.28 x 1.25)mm screws using the Phillips #00 screwdriver
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Continuing to use the Phillips #00 screwdriver, gently pry the silver plastic back plate from the body of the phone.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Pop the two black hinged-release levers toward their ribbons, then slide the ribbons out.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Pop the red hinged-release lever away from its ribbon. Then pull it out.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Peel the button sensor on the side of the motherboard off of the case.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Slightly pull up one side of the motherboard.
-
Pull the button/microphone plug out of its socket.
-
Pop the red hinged-release lever away from its ribbon, then slide the ribbon out.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
You have successfully removed the motherboard from the phone.
-