Introducción

You will need to find a clean area to work in and have the necessary tools. Follow this guide to gain access to your cellphone's motherboard.

    • Remove the back battery cover.

    Agregar Comentario

  1. Remove the phone's battery.
    • Remove the phone's battery.

    Agregar Comentario

    • Remove six (4.28 x 1.25)mm screws.

    Agregar Comentario

    • Use the spudger to gently pry the silver plastic back plate from the body of the phone.

    Agregar Comentario

    • It is very easy to rip motherboard cables and damage fragile motherboard clips. Be careful when you are removing every component.

    • Pull the antenna plug out of its socket.

    Agregar Comentario

    • Pop the two black hinged-release levers toward their ribbons, then slide the ribbons out.

    Agregar Comentario

    • Pop the red hinged-release lever away from its ribbon. Then pull it out.

    Agregar Comentario

    • Peel the button sensor on the side of the motherboard off of the case.

    Agregar Comentario

    • Slightly pull up one side of the motherboard.

    • Pull the button/microphone plug out of its socket.

    • Pop the red hinged-release lever away from its ribbon, then slide the ribbon out.

    Agregar Comentario

    • You have successfully removed the motherboard from the phone.

    Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Kevin Huang

Miembro Desde 20/04/11

11 Reputación

1 Guía escrita

Equipo

Cal Poly, Team 15-11, Regan Spring 2011 Miembro de Cal Poly, Team 15-11, Regan Spring 2011

CPSU-REGAN-S11S15G11

5 Miembros

14 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 2,193