Saltar al contenido principal

Samsung Eternity Camera Replacement

Qué necesitas

    • Remove the back battery cover.

  1. Samsung Eternity Camera Replacement: paso 2, imagen 1 de 1
    • Using the Phillips #00 screwdriver, remove the phone's battery.

  2. Samsung Eternity Camera Replacement: paso 3, imagen 1 de 1
    • Remove six (4.28 x 1.25)mm screws using the Phillips #00 screwdriver

  3. Samsung Eternity Camera Replacement: paso 4, imagen 1 de 2 Samsung Eternity Camera Replacement: paso 4, imagen 2 de 2
    • Continuing to use the Phillips #00 screwdriver, gently pry the silver plastic back plate from the body of the phone.

  4. Samsung Eternity Camera Replacement, Camera: paso 5, imagen 1 de 1
    • Peel off the Identification sticker.

  5. Samsung Eternity Camera Replacement: paso 6, imagen 1 de 1
    • Peel the button sensor on the side of the motherboard off of the case.

  6. Samsung Eternity Camera Replacement: paso 7, imagen 1 de 1
    • Pop the black hinged-release lever toward its ribbon, then slide the ribbon out.

  7. Samsung Eternity Camera Replacement: paso 8, imagen 1 de 1
    • Peel up the camera attachment.

  8. Samsung Eternity Camera Replacement: paso 9, imagen 1 de 1
    • You will now be able to replace the Camera component with a new part.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Equipo

Cal Poly, Team 15-11, Regan Spring 2011 Miembro de Cal Poly, Team 15-11, Regan Spring 2011

CPSU-REGAN-S11S15G11

5 Miembros

14 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 1

Ultimos 30 días: 1

Todo El Tiempo: 1,784