Repara tus cosas Comunidad Tienda

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Samsung Epic 4G Power Button Replacement

Introducción

This guide details how to install a new power button into your Samsung Epic 4G. Directions are provided for both disassembly and reassembly.

Qué necesitas

  1. Samsung Epic 4G Power Button Replacement, Phone Case: paso 1, imagen 1 de 1

    • Slide your fingernail along the edge of the device and pull at the plastic backing.

    • While pulling the plastic backing apart from the device, you will hear a snap sound which signals that the backing has detached.

    Traducir

  2. Samsung Epic 4G Power Button Replacement: paso 2, imagen 1 de 1

    • Pull at the plastic backing gently to remove it after hearing the snap sound.

    Traducir

  4. Samsung Epic 4G Power Button Replacement, Battery: paso 3, imagen 1 de 1

    • Remove the battery from the device by pulling the battery edge upwards.

    Traducir

  5. Samsung Epic 4G Power Button Replacement, Removing the Memory Card:: paso 4, imagen 1 de 1

    • Locate the memory card on the upper right-hand corner of the device.

    • Remove the memory card from the device by gently sliding it out of its holder with your fingers.

    Traducir

  6. Samsung Epic 4G Power Button Replacement, Removing the Back Housing: paso 5, imagen 1 de 2 Samsung Epic 4G Power Button Replacement, Removing the Back Housing: paso 5, imagen 2 de 2

    • Remove the seven screws from the back of the phone using the Phillips #000 screwdriver.

    • Separate the backing from the silver trim around the phone by using a nylon spudger to pry between the two components.

    • While separating the two components, most of the buttons (including the power button) will fall out.

    Traducir

  7. Samsung Epic 4G Power Button Replacement, Removing the Power Button: paso 6, imagen 1 de 2 Samsung Epic 4G Power Button Replacement, Removing the Power Button: paso 6, imagen 2 de 2

    • Remove the power button using tweezers if it did not fall out in the previous step.

    • At this point, you can replace the power button with a new one from a manufacturer.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Autor

con 12 otros colaboradores

Andrew Cunningham

Miembro Desde 10/03/12

273 Reputación

6 Guías creadas

Insignias: 12

+ 9 más insignias

Equipo

Cal Poly, Team 24-25, Regan Fall 2012 Miembro de Cal Poly, Team 24-25, Regan Fall 2012

CPSU-REGAN-F12S24G25

4 Miembros

7 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 14

Todo El Tiempo: 2,284