Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.
Introducción
This guide details how to install a new power button into your Samsung Epic 4G. Directions are provided for both disassembly and reassembly.
Qué necesitas
-
-
Slide your fingernail along the edge of the device and pull at the plastic backing.
-
-
-
Remove the memory card from the device by gently sliding it out of its holder.
-
-
-
Remove the seven screws from the back of the phone using the Phillips screwdriver.
-
Separate the back housing from the silver trim around the phone using a nylon spudger.
-
-
-
If it did not fall out in the previous step, remove the power button using tweezers.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.