Saltar al contenido principal

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Samsung Epic 4G Micro USB Port Replacement

Qué necesitas

  1. Samsung Epic 4G Micro USB Port Replacement, Phone Case: paso 1, imagen 1 de 1
    • Slide your fingernail along the edge of the device and pull at the plastic backing.

    • While pulling the plastic backing apart from the device, you will hear a snap sound which signals that the backing has detached.

  2. Samsung Epic 4G Micro USB Port Replacement: paso 2, imagen 1 de 1
    • Pull at the plastic backing gently to remove it after hearing the snap sound.

  3. Samsung Epic 4G Micro USB Port Replacement, Battery: paso 3, imagen 1 de 1
    • Remove the battery from the device by pulling the battery edge upwards.

  4. Samsung Epic 4G Micro USB Port Replacement, Removing the Memory Card:: paso 4, imagen 1 de 1
    • Locate the memory card on the upper right-hand corner of the device.

    • Remove the memory card from the device by gently sliding it out of its holder with your fingers.

  5. Samsung Epic 4G Micro USB Port Replacement, Removing the Back Housing: paso 5, imagen 1 de 2 Samsung Epic 4G Micro USB Port Replacement, Removing the Back Housing: paso 5, imagen 2 de 2
    • Remove the seven screws from the back of the phone using the Phillips #000 screwdriver.

    • Separate the backing from the silver trim around the phone by using a nylon spudger to pry between the two components.

    • While separating the two components, most of the buttons (including the power button) will fall out.

  6. Samsung Epic 4G Micro USB Port Replacement, Removing the Power Button: paso 6, imagen 1 de 2 Samsung Epic 4G Micro USB Port Replacement, Removing the Power Button: paso 6, imagen 2 de 2
    • Remove the power button using tweezers if it did not fall out in the previous step.

    • At this point, you can replace the power button with a new one from a manufacturer.

  7. Samsung Epic 4G Micro USB Port Replacement, Micro USB Port: paso 7, imagen 1 de 1
    • Remove the white cable on the right side of the phone (next to the battery housing) using the nylon spudger.

    • Pull out both ends of the white cable. They should easily snap out of place. Do not rip them out.

  8. Samsung Epic 4G Micro USB Port Replacement, Removing the Antenna Assembly: paso 8, imagen 1 de 2 Samsung Epic 4G Micro USB Port Replacement, Removing the Antenna Assembly: paso 8, imagen 2 de 2
    • Remove the screw holding the antenna assembly in place using a Tri-point Y0 screwdriver.

    • Snap the antenna assembly out of the device.

  9. Samsung Epic 4G Micro USB Port Replacement, Removing the Flex Cable: paso 9, imagen 1 de 2 Samsung Epic 4G Micro USB Port Replacement, Removing the Flex Cable: paso 9, imagen 2 de 2
    • Carefully pry the flex cable from the top of the phone using a nylon spudger.

    • Repeat this step for the larger flex cable located on the left side of the device.

  10. Samsung Epic 4G Micro USB Port Replacement: paso 10, imagen 1 de 1
    • Lift and remove the motherboard from the phone.

    • The USB port is located at the top of the motherboard. At this point, you can remove and replace the port with a new one.

Conclusión

To reassemble your device, follow these instructions in reverse order.

8 personas más completaron esta guía.

Equipo

Cal Poly, Team 24-25, Regan Fall 2012 Miembro de Cal Poly, Team 24-25, Regan Fall 2012

CPSU-REGAN-F12S24G25

4 Miembros

7 Guías creadas

Un comentario

My phone doesn’t have a memory card. At least, not that I can see. What should I do?

Joshua Campbell - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 5

Todo El Tiempo: 2,343