Saltar al contenido principal

Introducción

This guide will demonstrate how to remove and replace the front camera assembly on your Samsung Chromebook Series 3.

Partes

No se especificaron partes.

  1. Use the iFixit opening tool to get under the front cover and pop it out of place Use the iFixit opening tool to get under the front cover and pop it out of place Use the iFixit opening tool to get under the front cover and pop it out of place
    • Use the iFixit opening tool to get under the front cover and pop it out of place

  2. Remove the four 2.9 mm screws with the Phillips #00 Screwdriver bit. Using the iFixit opening tool, try to lift up the screen (it is held down by some adhesive). Using the iFixit opening tool, try to lift up the screen (it is held down by some adhesive).
    • Remove the four 2.9 mm screws with the Phillips #00 Screwdriver bit.

    • Using the iFixit opening tool, try to lift up the screen (it is held down by some adhesive).

  3. Kits de Reparación de Android

    Estás a un kit de tu nueva pantalla o batería.

    Comprar Ahora

    Kits de Reparación de Android

    Estás a un kit de tu nueva pantalla o batería.

    Comprar Ahora
  4. Lift the lever to release the cable and pull the cable out. Lift the lever to release the cable and pull the cable out. Lift the lever to release the cable and pull the cable out.
    • Lift the lever to release the cable and pull the cable out.

  5. You can now remove the screen.
    • You can now remove the screen.

  6. Disconnect the ribbon cable connected to the front camera assembly. You will need to flip up the little black lever to release the cable. You will need to flip up the little black lever to release the cable.
    • Disconnect the ribbon cable connected to the front camera assembly.

    • You will need to flip up the little black lever to release the cable.

  7. Use an iFixit opening tool to pry the front camera assembly from the adhesive holding it in place. Use an iFixit opening tool to pry the front camera assembly from the adhesive holding it in place.
    • Use an iFixit opening tool to pry the front camera assembly from the adhesive holding it in place.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Tyler Schultz

Miembro Desde 25/03/19

418 Reputación

3 Guías creadas

Equipo

IUPUI, Team S2-G1, Henning Spring 2019 Miembro de IUPUI, Team S2-G1, Henning Spring 2019

IUPUI-HENNING-S19S2G1

3 Miembros

5 Guías creadas

Añadir comentario

Ver Estadísticas:

Past 24 Hours: 2

Past 7 Days: 2

Past 30 Days: 7

Global: 44