Saltar al contenido principal

Introducción

Issues with a broken or cracked screen can be resolved by following this guide. The only tools required will be a plastic prying device, and a standard Phillips #0 Screwdriver

  1. Flip device over so that the underside is facing up. Remove nine,  7mm PH#0 screws from the bottom.
    • Flip device over so that the underside is facing up.

    • Remove nine, 7mm PH#0 screws from the bottom.

  2. Using the plastic opening tool, pry open the bottom of the Chromebook case, working all around the computer. Lift the panel out of the way to reveal the battery.
    • Using the plastic opening tool, pry open the bottom of the Chromebook case, working all around the computer.

    • Lift the panel out of the way to reveal the battery.

  3. Remove four,  5mm Phillips #0 screws connecting the battery to the laptop Remove four,  5mm Phillips #0 screws connecting the battery to the laptop
    • Remove four, 5mm Phillips #0 screws connecting the battery to the laptop

  4. Lift the battery, and pull it up and towards you, away from the connector.
    • Lift the battery, and pull it up and towards you, away from the connector.

    • Be sure to lift gently to avoid damage to connector

  5. Kits de Reparación de Batería de iPhone

    Sólo $29.99

    Buy Now

    Kits de Reparación de Batería de iPhone

    Sólo $29.99

    Buy Now
  6. Using  a plastic opening tool, pry the connector up from the contact.
    • Using a plastic opening tool, pry the connector up from the contact.

    • Remove the battery from the device.

  7. Remove the four 5mm Phillips #0 screws on the hinges. Remove the four 5mm Phillips #0 screws on the hinges.
    • Remove the four 5mm Phillips #0 screws on the hinges.

  8. Unplug two auxiliary wires leading to the top lid. Using the plastic prying tool, lift the hinge on the connector up and pull the connector away. Using the plastic prying tool, lift the hinge on the connector up and pull the connector away.
    • Unplug two auxiliary wires leading to the top lid.

    • Using the plastic prying tool, lift the hinge on the connector up and pull the connector away.

  9. Lift the hinges up and separate the top lid from the bottom casing.
    • Lift the hinges up and separate the top lid from the bottom casing.

  10. Using the plastic prying tool, carefully pry the casing apart from the screen. When prying case apart, there is a risk of screen and parts of the casing shattering and cutting you. When prying case apart, there is a risk of screen and parts of the casing shattering and cutting you.
    • Using the plastic prying tool, carefully pry the casing apart from the screen.

    • When prying case apart, there is a risk of screen and parts of the casing shattering and cutting you.

  11. Remove the four 5mm Phillips #0 screws holding the screen in place.
    • Remove the four 5mm Phillips #0 screws holding the screen in place.

  12. Lift and remove the screen from the device.
    • Lift and remove the screen from the device.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 1

Últimos 30 Días: 6

Todo El Tiempo: 78