Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Introducción

If one of your keys is no longer working, follow this guide and learn how to successfully replace a broken key cap or gain access to clean underneath it.

Partes

No se especificaron partes.

  1. Using a plastic opening tool, place it beneath the key in question and pry it off. Using a plastic opening tool, place it beneath the key in question and pry it off.
    • Using a plastic opening tool, place it beneath the key in question and pry it off.

  2. Remove the key fully from the board.
    • Remove the key fully from the board.

  3. Place a new key in the same orientation as the other keys.
    • Place a new key in the same orientation as the other keys.

    • Use your index finger to apply pressure onto the key until it clicks into place.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Alex Edwards

Miembro Desde 01/02/16

125 Reputación

1 Guía escrita

Equipo

UW Tacoma, Team 1-3, Rose Winter 2016 Miembro de UW Tacoma, Team 1-3, Rose Winter 2016

UWT-ROSE-W16S1G3

4 Miembros

4 Guías creadas

i tried this but a key stopped sticking to the board

darkclawsthenightwing - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 3

Todo El Tiempo: 662