Saltar al contenido principal

Introducción

How to remove the main speaker of the Samsung Captivate Glide.

Partes

No se especificaron partes.

  1. Samsung Captivate Glide Speaker Replacement, Motherboard: paso 1, imagen 1 de 3 Samsung Captivate Glide Speaker Replacement, Motherboard: paso 1, imagen 2 de 3 Samsung Captivate Glide Speaker Replacement, Motherboard: paso 1, imagen 3 de 3
    • Remove back cover using fingernail or plastic opening tool. The cover pulls up and off.

  2. Samsung Captivate Glide Speaker Replacement: paso 2, imagen 1 de 2 Samsung Captivate Glide Speaker Replacement: paso 2, imagen 2 de 2
    • Remove battery with plastic opening tool or finger.

  3. Samsung Captivate Glide Speaker Replacement: paso 3, imagen 1 de 2 Samsung Captivate Glide Speaker Replacement: paso 3, imagen 2 de 2
    • Remove the seven screws from backplate using the #00 screwdriver.

  4. Samsung Captivate Glide Speaker Replacement: paso 4, imagen 1 de 3 Samsung Captivate Glide Speaker Replacement: paso 4, imagen 2 de 3 Samsung Captivate Glide Speaker Replacement: paso 4, imagen 3 de 3
    • Remove the back plate using the plastic opening tool.

    • There is a lip on each side, and both must be pried up.

    • You can work your way around the edges after prying the two sides.

  5. Samsung Captivate Glide Speaker Replacement: paso 5, imagen 1 de 2 Samsung Captivate Glide Speaker Replacement: paso 5, imagen 2 de 2
    • Use the plastic opening tool to detach the two tabs connecting the motherboard to the base of the phone.

  6. Samsung Captivate Glide Speaker Replacement: paso 6, imagen 1 de 1
    • Disconnect the antenna cable from the motherboard using tweezers.

  7. Samsung Captivate Glide Speaker Replacement: paso 7, imagen 1 de 1
    • Remove the single screw connecting the motherboard to the base of the phone by using the #00 Phillips screwdriver.

  8. Samsung Captivate Glide Speaker Replacement: paso 8, imagen 1 de 2 Samsung Captivate Glide Speaker Replacement: paso 8, imagen 2 de 2
    • Lift the motherboard out of the base of the phone.

  9. Samsung Captivate Glide Speaker Replacement, Speaker: paso 9, imagen 1 de 1
    • Using the plastic opening tool, detach the tab connecting the speaker to the motherboard.

  10. Samsung Captivate Glide Speaker Replacement: paso 10, imagen 1 de 1
    • Remove speaker manually.

    • There is nothing connecting it to the motherboard, so just pull.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Nicholas Mira

Miembro Desde 23/09/14

280 Reputación

2 Guías creadas

Equipo

USF Tampa, Team 5-3, Mcgee Fall 2014 Miembro de USF Tampa, Team 5-3, Mcgee Fall 2014

USFT-MCGEE-F14S5G3

4 Miembros

5 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 2

Todo El Tiempo: 341