Introducción

This guide shows you how to remove a broken camera and install a new camera.

push down the back cover of the phone, then take it out.
  • push down the back cover of the phone, then take it out.

Agregar Comentario

Remove the battery.
  • Remove the battery.

Agregar Comentario

  • Remove the (2) 4.1 mm screws on screen.

Agregar Comentario

  • Remove front outside casing with plastic opening tools.

Agregar Comentario

  • Use tweezers to remove the camera from its holding slot.

Agregar Comentario

  • Use a plastic opening tool to lift the tab that holds the camera ribbon in place.

Agregar Comentario

  • Use tweezers to remove the camera.

Agregar Comentario

  • Slide ribbon of new camera under the same tab.

Agregar Comentario

  • Close the tab down onto the new camera ribbon.

Agregar Comentario

  • Use tweezers to put the new camera into the camera slot that previously held the old camera.

  • WARNING: Do not touch the camera lens as it will easily scratch or smudge.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Chris

Miembro Desde 16/04/11

133 Reputación

5 Guías creadas

Equipo

Cal Poly, Team 12-35, Maness Spring 2011 Miembro de Cal Poly, Team 12-35, Maness Spring 2011

CPSU-MANESS-S11S12G35

4 Miembros

10 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 2,103