Introducción

The back speaker emits noise for your phone's ringtones, music, sound effects, and speakerphone conversations. Installing a new back speaker may alleviate distorted or missing noise.

Partes

No se requieren partes.

To remove the back casing, firmly press down and push towards the bottom of the phone.
  • To remove the back casing, firmly press down and push towards the bottom of the phone.

Agregar Comentario

With the casing removed, lift the battery from the indicated indentation.
  • With the casing removed, lift the battery from the indicated indentation.

Agregar Comentario

  • From here, you can now access the SIM card and model/serial numbers.

Agregar Comentario

  • Using the Phillips #00 screwdriver, remove the four indicated screws (4.5 mm).

Agregar Comentario

  • Press the pointed edge of the spudger into the side of the two rubber plugs in order to lift and remove them from the top of the phone.

  • Then, using the Phillips #00 screwdriver, remove the two indicated Phillip screws (6.5 mm).

Agregar Comentario

  • To remove the SIM card, start by pressing the top of the card and push down and away towards the bottom of the phone. Then, as indicated, pull the SIM card out.

Agregar Comentario

  • Begin to slowly lift the back casing of the phone. You should hear a snap when the casing is released.

  • The power, volume, and camera buttons may fall out when separating the front and back casing.

Agregar Comentario

  • Your casing should be separated and the three loose buttons put to the side.

  • Be aware of the wiring on the top of the phone. Make sure not to pull it apart when separating the case.

Agregar Comentario

  • Slowly remove the back casing by gently pulling the ribbon connection.

Agregar Comentario

  • Gently pull on the wires to remove the front casing.

Agregar Comentario

  • Your front casing and front speaker are now released.

Agregar Comentario

  • Locate the back speaker.

Agregar Comentario

  • Use the flat edge of the spudger to gently pry and remove the speaker.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Breanne

Miembro Desde 12/04/12

187 Reputación

5 Guías creadas

Equipo

Cal Poly, Team 6-24, Amido Spring 2012 Miembro de Cal Poly, Team 6-24, Amido Spring 2012

CPSU-AMIDO-S12S6G24

3 Miembros

7 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 1

Todo El Tiempo: 768