Saltar al contenido principal

Introducción

Prereq-only guide to prepare the MiTM Air Compressors AM1PH6508HD 2012 for service.

  1. Before you begin, make sure the device is powered down and cool to the touch. Flip the engine switch into the OFF position.
    • Before you begin, make sure the device is powered down and cool to the touch.

    • Flip the engine switch into the OFF position.

  2. Grab the plastic housing at the end of the spark plug wire. Pull firmly to disconnect the wire from the spark plug.
    • Grab the plastic housing at the end of the spark plug wire.

    • Pull firmly to disconnect the wire from the spark plug.

  3. Pull the ring on the safety relief valve away from the compressor tank to drain the air from the compressor. Ensure the tank is completely depressurized before starting repairs.
    • Pull the ring on the safety relief valve away from the compressor tank to drain the air from the compressor.

    • Ensure the tank is completely depressurized before starting repairs.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Kyle Smith

Miembro Desde 01/02/21

23,156 Reputación

92 Guías creadas

Equipo

iFixit Miembro de iFixit

Community

138 Miembros

15,634 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 14