Saltar al contenido principal

Introducción

If the water tank drips when it is not installed in the machine, then the water tank seal needs to be replaced. This simple repair will be demonstrate hier. If the water tank loses water while it is inserted in the coffee machine, then the water tank seal in the unit needs to replaced. This is shown here

Partes

  1. Lift the water tank off the machine
    • Lift the water tank off the machine

  2. With your fingers pull the filter off the water outlet.
    • With your fingers pull the filter off the water outlet.

  3. With your fingers press the valve stem from the bottom up . Now you can pry off the seal with a spatula tip.
    • With your fingers press the valve stem from the bottom up . Now you can pry off the seal with a spatula tip.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Un agradecimiento especial a estos traductores:

100%

¡ oldturkey03 nos está ayudando a reparar el mundo! ¿Quieres contribuir?
Empezar a traducir ›

VauWeh

Miembro Desde 19/10/15

76,495 Reputación

87 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 4

Últimos 30 Días: 21

Todo El Tiempo: 228