Introducción
I needed a SMD resistors organizer for cheap, I made it!
E12 values can be divided on 2 lot of 6 values, and a sheet of paper can hold 6 values.
One organizer and contain 1 Ohm to 1MOhms with 12 sheets!
the cost is negligible.
-
-
prepare the pocket
-
full video here: https://www.youtube.com/watch?v=IRFWIqLJ...
-
-
-
-
even sheet with: 10, 12, 15, 18, 22, 27
-
odd sheets with: 33, 39, 47, 56, 68, 82
-
mark the pocket and put tape on long sides
-
-
-
tape the pocket on the right sheet.
-
place the sheet in a usual plastic pocket to prevent the paper pocket to open!
-
-
-
for E12 series, each range of power of 10 can be divided in 2 sheets of 6 pockets.
-
But you can decide to use the same technique to organize E24 resistors, you just need 4 sheets/range.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
