Introducción

This guide will be showing step-by-step instructions on how to get to and replace the motor of the airsoft gun.

Using a Phillips #0 screwdriver, remove the two 6mm screws located at the bottom of the hand grip.
  • Using a Phillips #0 screwdriver, remove the two 6mm screws located at the bottom of the hand grip.

    • Slide the cover off.

Agregar Comentario

Pull the motor out from the inside of the hand grip.
  • Pull the motor out from the inside of the hand grip.

  • Using a soldering iron and desoldering wick, desolder the wires from the motor.

Agregar Comentario

  • Using a soldering iron, solder the wires onto the new motor.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Anika Morris

Miembro Desde 05/10/12

1 Reputación

4 Guías creadas

Equipo

Cal Poly, Team 18-41, Regan Fall 2012 Miembro de Cal Poly, Team 18-41, Regan Fall 2012

CPSU-REGAN-F12S18G41

6 Miembros

6 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 2

Todo El Tiempo: 594