Saltar al contenido principal

Introducción

This guide will cover how to remove the screen of a Samsung ATIV Book 9 Plus.

Partes

No se especificaron partes.

  1. Remove the ten 4.3mm Phillips #00 screws from the bottom cover of the laptop. Remove the ten 4.3mm Phillips #00 screws from the bottom cover of the laptop.
    • Remove the ten 4.3mm Phillips #00 screws from the bottom cover of the laptop.

  2. Press the button to release the bottom cover. Press the button to release the bottom cover. Press the button to release the bottom cover.
    • Press the button to release the bottom cover.

  3. Remove the five 4.3mm Phillips #00 screws from the battery. Remove the five 4.3mm Phillips #00 screws from the battery.
    • Remove the five 4.3mm Phillips #00 screws from the battery.

  4. Lift the battery with both hands and remove. Lift the battery with both hands and remove.
    • Lift the battery with both hands and remove.

  5. Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now

    Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now
  6. Disconnect the display cable from the motherboard. Disconnect the display cable from the motherboard. Disconnect the display cable from the motherboard.
    • Disconnect the display cable from the motherboard.

  7. Disconnect the black and white antenna cables from the Wi-Fi card. Disconnect the black and white antenna cables from the Wi-Fi card.
    • Disconnect the black and white antenna cables from the Wi-Fi card.

  8. Remove the five 4mm Phillips #00 screws from the motherboard retaining brackets. Remove the five 4mm Phillips #00 screws from the motherboard retaining brackets.
    • Remove the five 4mm Phillips #00 screws from the motherboard retaining brackets.

  9. Remove the eight silver 4.2mm Phillips #00 screws from the corner. Remove the eight silver 4.2mm Phillips #00 screws from the corner.
    • Remove the eight silver 4.2mm Phillips #00 screws from the corner.

  10. Pry up the metal hinges from the laptop. Pry up the metal hinges from the laptop. Pry up the metal hinges from the laptop.
    • Pry up the metal hinges from the laptop.

  11. Place the screen on its back side and hold the battery-side of the laptop. In an upward motion, remove the back set off and set it aside. Place the screen on its back side and hold the battery-side of the laptop. In an upward motion, remove the back set off and set it aside. Place the screen on its back side and hold the battery-side of the laptop. In an upward motion, remove the back set off and set it aside.
    • Place the screen on its back side and hold the battery-side of the laptop. In an upward motion, remove the back set off and set it aside.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Sean Kim

Miembro Desde 12/04/18

616 Reputación

4 Guías creadas

Equipo

UW Tacoma, Team S1-G2, Liner Spring 2018 Miembro de UW Tacoma, Team S1-G2, Liner Spring 2018

UWT-LINER-S18S1G2

5 Miembros

4 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 3

Todo El Tiempo: 138