Ryobi P202 Level Gauge Replacement

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Introducción

This guide demonstrates how to replace the level gauge of the drill, located along the top of drill. The process requires opening the drill, but does not require removing any of the internal electronic components.

Qué necesitas

Paso 1 Battery

Ryobi P202 Level Gauge Replacement, Battery: paso 1, imagen 1 de 3

Ryobi P202 Level Gauge Replacement, Battery: paso 1, imagen 2 de 3

Ryobi P202 Level Gauge Replacement, Battery: paso 1, imagen 3 de 3

The battery can shock you. Only touch plastic, non-conductive components.
Detach the battery unit from the drill body by pressing the battery release buttons on both sides of the unit and pulling outwards.

Traducir

Paso 2 Right Side Case

Ryobi P202 Level Gauge Replacement, Right Side Case: paso 2, imagen 1 de 2

Ryobi P202 Level Gauge Replacement, Right Side Case: paso 2, imagen 2 de 2

Use a Torx T10 screw driver to unscrew all ten 13.5 mm screws from the drill casing to gain access to the interior.

Traducir

Paso 3

Gently lift the casing from the drill body.
Take the casing completely off the drill body to gain access to the interior of the drill.
The Ryobi P202 casing has Part #: 200690001