Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Flip the vacuum over so that the wheels are facing you.
-
Use a Phillips #1 screwdriver to remove the four 10 mm screws that surround the battery cover.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Lift the battery cover up to reveal the battery.
-
Remove the battery.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Pry off the back bumper by going around the entire top of the bumper with the metal spudger.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
To access the motherboard, lift the top portion of the vacuum off.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use a Phillips #1 screwdriver to remove the four 10 mm screws holding the motherboard in place.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Pinch the two tabs together, shown here, to loosen the motherboard out of the vacuum.
-
Lightly pull on the USB connector shown to lift the motherboard out.
-
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.
3 comentarios
This was GREAT.... Lots of pics :-)
I was able to pull the mother board without much trouble. Mostly scared of breaking the connections.
NOW???? Where do I buy the darn thing?
Please respond,
Robert
Unfortunately, it looks like Moneual had some fraud issues and went under in 2014. It may be difficult to get your hands on replacement parts for the Rydis H68 Pro. =[
Richard -