Introducción
If the power switch is stuck or not functioning anymore, you will need to replace the power switch circuit board. in order to replace the power switch circuit board you will need to remove the saw casing and motor assembly.
Qué necesitas
-
-
Orient the saw so that the handle is closest to you and the saw end points towards the left.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.
Un comentario
Nice guide, I can’t seem to find the switch online, it seems to be discontinued