Repara tus cosas Comunidad Tienda

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Rotary Multi Selector Wheel Removal

Introducción

This guide is for the removal or installation of the rotary multi selector wheel.

Qué necesitas

  1. Rotary Multi Selector Wheel Removal, Back Cover Removal: paso 1, imagen 1 de 3 Rotary Multi Selector Wheel Removal, Back Cover Removal: paso 1, imagen 2 de 3 Rotary Multi Selector Wheel Removal, Back Cover Removal: paso 1, imagen 3 de 3

    • Unscrew the two 3.5mm Phillips screws from the side with the AV outlet.

    • Unscrew the 3.5mm Phillips screw from the opposite side of the camera.

    • Unscrew the six 3.5mm Phillips screws from the bottom of the camera.

    Traducir

  2. Rotary Multi Selector Wheel Removal: paso 2, imagen 1 de 1

    • Carefully remove the back casing from the camera.

    • Be mindful when removing the back casing as there is a ribbon that still connects the back casing to the motherboard.

    Traducir

  4. Rotary Multi Selector Wheel Removal, Detaching Ribbon: paso 3, imagen 1 de 2 Rotary Multi Selector Wheel Removal, Detaching Ribbon: paso 3, imagen 2 de 2

    • Place the plastic opening tool underneath the ribbon tab as shown. Gently lift the tab up.

    • Gently pull the ribbon from the logic board with tweezers.

    • With the ribbon disconnected, the back casing should now be detached from the rest of the camera.

    Traducir

  5. Rotary Multi Selector Wheel Removal, Rotary Multi Selector Wheel: paso 4, imagen 1 de 3 Rotary Multi Selector Wheel Removal, Rotary Multi Selector Wheel: paso 4, imagen 2 de 3 Rotary Multi Selector Wheel Removal, Rotary Multi Selector Wheel: paso 4, imagen 3 de 3

    • Lift up the metal cover and its button slowly using the tweezers.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 5 otros colaboradores

Andrew Lau

Miembro Desde 04/18/13

1 Reputación

1 Guía escrita

Insignias: 3

Equipo

Cal Poly, Team 8-56, Johann Spring 2013 Miembro de Cal Poly, Team 8-56, Johann Spring 2013

CPSU-JOHANN-S13S8G56

4 Miembros

18 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 4

Todo El Tiempo: 500